Home › Engine / Hybrid System › 14B (LUBRICATION) › OIL PUMP › 2017.01–2019.08
RM2850E _51 Engine / Hybrid System _073172 14B LUBRICATION _0356062 OIL PUMP A

14B LUBRICATION  OIL PUMP  DRIVE SPLINE REPLACEMENT  


PROCEDURE

Hide 1. DRIVE SPLINE REPLACEMENT

a.
A424275

Remove the 2 set keys.


b.

Set the drive spline with the hole facing downward by turning the crankshaft.


c.
A424276

Using a chisel and hammer. tap the drive spline out of the hole until SST can be hooked to spline's end.


d.
A424277

Install a standard bolt (Part No. 90101 -16027: 16 mm normnal diameter, 1.5 mm pitch) to the crankshaft.


e.

Using SST, remove the drive spline.

SST
09950-40011  (09951-04010, 09952-04010, 09953-04030, 09954-04020, 09955-04061)


f.

Remove the standard bolt.


Hide 2.INSTALL NEW DRIVE SPLINE

a.
A424278

Using SST and a hammer, tap in the drive spline.

SST
09608-06041  


b.

Install the 2 set keys.