Home › Engine / Hybrid System › 14B (LUBRICATION) › ENGINE OIL COOLER › 2017.01–2019.08
RM2850E _51 Engine / Hybrid System _073172 14B LUBRICATION _0356064 ENGINE OIL COOLER A

14B LUBRICATION  ENGINE OIL COOLER  OIL COOLER REMOVAL  


PROCEDURE

Hide 1.DRAIN ENGINE COOLANT

Hide 3.REMOVE TURBO OIL PIPE AND TURBOCHARGER STAY (15B-FT)

Hide 4.REMOVE RELIEF VALVE

a.
A424288

Remove the plug, gasket, spring relief valve and gasket.


Hide 15609 5.REMOVE OIL FILTER BRACKET

a.
A424289

Remove the 4 (3B, 14B, 15B-F) or 3 (15B-FT) bolts, bracket and gasket.


Hide 6.REMOVE STUD BOLT FOR EXHAUST MANIFOLD (3B, 14B, 15B-F)

a.
A424290

Using a torx socket (E10), remove the stud bolt.


Hide 7.REMOVE BOLTS HOLDING ACTUATOR TO TURBOCHARGER

a.

Remove the 2 bolts, pull the actuator.

NOTICE:

Be careful not to bent or damage the actuator rod.



Hide 8.REMOVE OIL COOLER AND COVER ASSEMBLY

a.
A424291

Using a 6 mm hexagon wrench, remove the bolt and washer.


b.

Remove the 8 bolts, 3 nuts, the oil cooler, cover assembly and gasket.


Hide 9.REMOVE OIL COOLER FROM OIL COOLER COVER

a.

Remove the 4 nuts, oil cooler and gasket.