13711
1.REMOVE INTAKE VALVE
Using SST, remove the retainer lock and remove the retainer, compression spring and valve.
Keep the removed parts in the correct order so that they can be returned to their original positions when reassembled.
13715
2.REMOVE EXHAUST VALVE
Using SST, remove the retainer lock and remove the retainer, compression spring and valve.
Keep the removed parts in the correct order so that they can be returned to their original positions when reassembled.
3.REMOVE VALVE STEM OIL SHIELD
Using needle-nose pliers, remove the oil shield.
4.REMOVE STUD BOLT
| *a | Intake Manifold Side |
| *b | Exhaust Manifold Side |
Remove the 10 stud bolts.