1.REPAIR VALVE SEAT
Gradually release the seat cutter pressure to make the valve seat surface smoother.
| *a | Intake Side |
| *b | Exhaust Side |
If the seating is too high on the valve face, use 30° and 45° cutters to correct the seat.
0.8 to 1.0 mm (0.0315 to 0.0394 in.)
1.8 to 2.0 mm (0.0709 to 0.0787 in.)
When grinding, the valve tips may break off on impact. Wear safety glasses to protect your eyes.