Home › Engine / Hybrid System › N04C-UH (FUEL) › FUEL INJECTOR
RM2850E _51 Engine / Hybrid System _073175 N04C-UH FUEL _0356078 FUEL INJECTOR G

N04C-UH FUEL  FUEL INJECTOR  INSPECTION  


PROCEDURE

Hide 23670 1.INSPECT INJECTOR ASSEMBLY (for TCAP Made)

a.
A101541E01
0.151,0.085 0.318,0.255 0.167,0.17 10 *a

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*a Component without harness connected
(Injector Assembly)

Standard Resistance:
Tester Connection Condition Specified Condition

If the result is not as specified, replace the injector.

1 - 2 20°C (68°F) 0.85 to 1.05 Ω



Hide 23670 2.INSPECT INJECTOR ASSEMBLY (except TCAP Made)

a.
A101541E01
0.151,0.085 0.318,0.255 0.167,0.17 10 *a

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*a Component without harness connected
(Injector Assembly)

Standard Resistance:
Tester Connection Condition Specified Condition

If the result is not as specified, replace the injector.

1 - 2 20°C (68°F) 0.35 to 0.57 Ω