Home › Engine / Hybrid System › N04C-UH (FUEL) › FUEL FILTER
RM2850E _51 Engine / Hybrid System _073175 N04C-UH FUEL _0356080 FUEL FILTER G

N04C-UH FUEL  FUEL FILTER  INSPECTION  


PROCEDURE

Hide 84461B 1.INSPECT LEVEL WARNING SWITCH

a.

Check the level warning switch resistance.

i.
A430893E01
1.094,0.458 1.406,0.656 0.313,0.198 10 false *b 1.104,1.115 1.417,1.313 0.313,0.198 10 false *c 0.104,0.083 0.417,0.281 0.313,0.198 10 false *a

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*a Component without harness connected
(Level Warning Switch)
*b ON
*c OFF

Standard Resistance:
Tester Connection Switch Condition Specified Condition

If the result is not as specified, replace the level warning switch.

1 - 2 ON Below 1 Ω
1 - 2 OFF 10 kΩ or higher




Hide 2.INSPECT CLOGGING SWITCH

a.
A218784E01
0.198,0.128 0.397,0.303 0.2,0.175 10 *a

Measure the resistance between the terminals.

Text in Illustration
*a Component without harness connected
(Clogging Switch)

Standard Resistance:
Tester Connection Condition Specified Condition

If the result is not as specified, replace the fuel filter assembly.

1 - 2 20°C (68°F) Below 1 Ω