1.INSPECT COMMON RAIL ASSEMBLY
Check the fuel pressure sensor.
| *a | Component without harness connected
(Common Rail Assembly) |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
|
If the result is not as specified, replace the common rail assembly. |
||
| 2 (PR) - 3 (E2) | 20°C (68°F) | 16.4 kΩ or less |
| 1 (VC) - 2 (PR) | 20°C (68°F) | 3 kΩ or less |