Home › Engine / Hybrid System › N04C-UH (EMISSION CONTROL) › EXHAUST GAS TEMPERATURE SENSOR
RM2850E _51 Engine / Hybrid System _073176 N04C-UH EMISSION CONTROL _0356088 EXHAUST GAS TEMPERATURE SENSOR A

N04C-UH EMISSION CONTROL  EXHAUST GAS TEMPERATURE SENSOR  REMOVAL  


PROCEDURE

Hide 89425 1.REMOVE EXHAUST GAS TEMPERATURE SENSOR

a.
A146796

Disconnect the sensor connector.


b.

Using a union nut wrench (14 mm), loosen the union nut and remove the sensor.


Hide 89425A 2.REMOVE NO. 2 EXHAUST GAS TEMPERATURE SENSOR

a.
A146797

Disconnect the sensor connector and 2 harness clamps.


b.

Using a union nut wrench (14 mm), loosen the union nut and remove the sensor.