Home › Engine / Hybrid System › N04C-UH (EMISSION CONTROL) › EXHAUST GAS TEMPERATURE SENSOR
RM2850E _51 Engine / Hybrid System _073176 N04C-UH EMISSION CONTROL _0356088 EXHAUST GAS TEMPERATURE SENSOR G

N04C-UH EMISSION CONTROL  EXHAUST GAS TEMPERATURE SENSOR  INSPECTION  


PROCEDURE

Hide 89425 1.INSPECT EXHAUST GAS TEMPERATURE SENSOR

a.

Check the exhaust gas temperature sensor resistance.

i.
A101574E01
0.148,0.086 0.356,0.264 0.208,0.178 10 *a

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*a Component without harness connected
(exhaust gas temperature sensor)

Standard Resistance:
Tester Connection Condition Specified Condition

If the result is not as specified, replace the sensor.

1 - 2 50°C (122°F) 82 kΩ to 137 kΩ




Hide 89425A 2.INSPECT NO. 2 EXHAUST GAS TEMPERATURE SENSOR

a.

Check the No. 2 exhaust gas temperature sensor resistance.

i.
A101574E01
0.148,0.086 0.356,0.264 0.208,0.178 10 *a

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*a Component without harness connected
(No. 2 exhaust gas temperature sensor)

Standard Resistance:
Tester Connection Condition Specified Condition

If the result is not as specified, replace the sensor.

1 - 2 50°C (122°F) 82 kΩ to 137 kΩ