Home › Engine / Hybrid System › N04C-UH (EMISSION CONTROL) › DPF SWITCH
RM2850E _51 Engine / Hybrid System _073176 N04C-UH EMISSION CONTROL _0356089 DPF SWITCH G

N04C-UH EMISSION CONTROL  DPF SWITCH  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 84270K 1.INSPECT DPR SWITCH ASSEMBLY

a.
A356573E02
2.083,1.135 2.5,0.854 2.5,0.854 2.75,0.854 false 0.625,0.917 0.875,0.917 0.875,0.917 1.354,1.135 false 0.115,0.094 0.427,0.292 0.313,0.198 10 false *a 0.479,0.844 0.677,1.052 0.198,0.208 10 false B 2.802,0.781 2.958,0.979 0.156,0.198 10 false E

Check the DPF switch assembly resistance.

Text in Illustration
*a Component without harness connected
(DPF Switch assembly)

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition

If the resistance is not as specified, replace the DPF Switch assembly.

1(E) - 4(B) OFF 10 kΩ or higher
ON Below 1 Ω