Home › Drivetrain › AXLE AND DIFFERENTIAL › REAR AXLE SHAFT
RM2850E _52 Drivetrain _073182 AXLE AND DIFFERENTIAL _0356117 REAR AXLE SHAFT A

AXLE AND DIFFERENTIAL  REAR AXLE SHAFT  INSTALLATION  


PROCEDURE

Hide 42312 1.INSTALL REAR AXLE SHAFT

a.
C396725

Apply MP grease to the oil seal lip.


b.
C396726

Install a new gasket and rear axle shaft to the axle housing.

HINT:

Be careful not to damage the oil seal with the splines.



c.
C396727

Install the 6 cone washers and nuts to the axle hub.

Torque:

61 N*m (620 kgf*cm, 45 ft.*lbf)



d.

Install the 2 wheel cap set bolts.