Home › General › SPECIFICATIONS › CLUTCH › 2017.01–2021.01
RM2850E _V1 General _073185 SPECIFICATIONS _0356130 CLUTCH F

SPECIFICATIONS  CLUTCH  TORQUE SPECIFICATIONS  


Part Tightened N*m kgf*cm ft.*lbf
exhaustretarder switch assembly 25 255 18
Push rod clevis lock nut 12 120 9
Clutch pedal sub-assembly x Pedal bracket sub-assembly 30 306 22
w/o Clutch Booster:
Clutch master cylinder assembly x Pedal bracket sub-assembly
17 175 13
w/ Clutch Booster:
Clutch master cylinder assembly x Pedal bracket sub-assembly
13 130 9
Tube connector tube x Clutch master cylinder assembly without union nut wrench 24 245 18
with union nut wrench 22 220 16
Release cylinder bleeder plug 11 110 8
Clutch release cylinder assembly 12 120 9
Flexible hose tube x Clutch release cylinder assembly without union nut wrench 24 245 18
with union nut wrench 22 220 16
clutch accumulator assembly 18 178 13
2 way tube x Clutch accumulator assembly without union nut wrench 24 245 18
with union nut wrench 22 220 16
for M15#:
Flywheel bolt
190 1937 140
for M155 with 1BZ-FPE:
Clutch cover
39 400 29
except M155 with 1BZ-FPE:
Clutch cover
19 194 14
for M156:
Release fork support
39 398 29
except M156:
Release fork support
47 480 35
for M551:
Flywheel bolt
190 1937 140
for M551:
Clutch cover
39 400 29
for M551:
Release fork support
47 480 35