86650H
1.INSPECT BACK BUZZER ASSEMBLY (2009/08-2012/09)
Apply battery voltage to the back buzzer assembly terminals.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → 2
Battery negative (-) → 1 |
Back buzzer assembly sounds |
If the result is not as specified, replace the back buzzer.
| *a | Component without harness connected
(Back buzzer assembly) |
86650H
2.INSPECT BACK BUZZER ASSEMBLY (2012/09-)
Apply battery voltage to the back buzzer assembly terminals.
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → 1
Battery negative (-) → 2 |
Back buzzer assembly sounds |
If the result is not as specified, replace the back buzzer.
| *a | Component without harness connected
(Back buzzer assembly) |