Home › Drivetrain › M15# (MANUAL TRANSMISSION / TRANSAXLE) › COUNTER GEAR AND REVERSE IDLER GEAR
RM2850E _52 Drivetrain _073186 M15# MANUAL TRANSMISSION / TRANSAXLE _0356136 COUNTER GEAR AND REVERSE IDLER GEAR G

M15# MANUAL TRANSMISSION / TRANSAXLE  COUNTER GEAR AND REVERSE IDLER GEAR  INSPECTION  


PROCEDURE

Hide 33421 1.INSPECT COUNTER GEAR

a.
C403330

Using a micrometer, measure the outer diameter of the counter gear journal.

Minimum diameter:

36.957 mm (1.4550 in.)


If diameter is less than the minimum, replace the counter gear.


Hide 2.INSPECT REVERSE IDLER GEAR OIL CLEARANCE

a.
C403331

Using a dial indicator, measure the reverse idler gear oil clearance.

Standard clearance:

0.015 to 0.059 mm (0.0006 to 0.0023 in.)


If the clearance exceeds the limit, replace the gear and/or shaft.