33257
1.REMOVE SELECT OUTER LEVER AND LEVER SHAFT
Remove the nut and washer.
Using a brass bar and hammer, drive out the lever lock pin.
Remove the select outer lever, plate washer and lever shaft from the shift lever housing.
33531B
2.REMOVE SELECT OUTER LEVER AND BOOT
Remove the nut and washer.
Using a brass bar and hammer, drive out the lever lock pin.
Pull out the shift outer lever and boot from the shift lever shaft.
33262E
3.REMOVE SHIFT AND SELECT LEVER AND SHAFT
Using a pin punch and hammer, drive out the slotted spring pin.
Remove the shift lever shaft.
Remove the shift and select lever and 2 compression springs.
33263C
4.REMOVE NO. 2 SHIFT LEVER AND SHAFT
Using a magnetic finger, remove the straight pin.
Using a plastic hammer, tap the No. 2 shift lever and remove the tight plug.
Remove the 2 E-rings.
Remove the No. 2 shift lever and shaft.