1. SECURE VEHICLE
Fully apply the parking brake and chock a wheel.
Make sure to apply the parking brake and chock a wheel before performing this procedure.
If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.
33504F
2.REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY
Remove the shift lever knob sub-assembly.
58534A
3.REMOVE TRANSMISSION COVER MAT
Remove the transmission cover mat from the shift and select lever support.
33555D
4.REMOVE SHIFT LEVER BOOT
for RHD:
Remove the 3 bolts.
| *A | for RHD |
| *B | for LHD |
|
Removal Direction |
While sliding the shift lever, pull the shift lever boot diagonally to remove it.
for LHD:
Remove the 4 bolts.
While sliding the shift lever, pull the shift lever boot diagonally to remove it.
58848A
5.REMOVE SHIFT LEVER HOLE COVER
Remove the 4 bolts and shift lever hole cover.
| *A | for RHD |
| *B | for LHD |
58521D
6.REMOVE ENGINE SERVICE HOLE COVER MAT
58420
7.REMOVE NO. 2 ENGINE SERVICE HOLE COVER ASSEMBLY
58410
8.REMOVE ENGINE SERVICE HOLE COVER
9.REMOVE SHIFT AND SELECT TRANSMISSION CONTROL CABLE
Remove the nut and clip and disconnect the shift transmission control cable.
| *A | for RHD |
| *B | for LHD |
Remove the 2 clips and washer and disconnect the select transmission control cable.
| *A | for RHD |
| *B | for LHD |
| *a | Selecting Bell Crank |
for LHD:
Remove the nut and transmission control cable clamp.
Remove the bolt and No. 4 transmission control cable bracket.
| *A | for RHD |
| *B | for LHD |
Remove the 2 clips, the 2 nuts and the shift and select transmission control cable.