33251A
1.REMOVE NO. 1 SHIFT LEVER INNER
Fix the shift lever shaft through 2 protective aluminium plates in a vise.
Using a pin punch (5 mm (0.20 in.)) and hammer, tap out slotted pin. Remove the shift lever and shift inner lock plate from the shift lever shaft.
33237B
2.REMOVE SELECT HEAD INNER
Using a pin punch (5 mm (0.20 in.)) and hammer, tap out slotted pin.
Remove the select head inner, select return spring and select spring seat from the shift lever shaft.
33506D
3.REMOVE CONTROL SHAFT COVER SUB-ASSEMBLY
Using 2 screwdrivers and hammer, tap out the snap ring. Remove the shift lever shaft from the control shaft cover.
Remove the dust boot from the shift lever shaft.
Remove the shift lever shaft from the vise.
33203B
4.REMOVE SHIFT LEVER SHAFT OIL SEAL
Using a screwdriver, pry out the oil seal from the control shaft cover.
Tape the screwdriver tip before use.