Use the same procedure for RHD and LHD vehicles.
84933
1.INSPECT DOOR LOCK UNLOCK SWITCH
Check the door lock unlock switch.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Switch Condition | Specified Condition |
|---|---|---|
| 3 (L) - 4 (E) | LOCK | Below 1 Ω |
| 3 (L) - 4 (E)
2 (UL) - 4 (E) |
OFF | 10 kΩ or higher |
| 2 (UL) - 4 (E) | UNLOCK | Below 1 Ω |
Check that the indicator illuminates.
Apply battery voltage to the door lock unlock switch and check that the indicator illuminates.
| Tester Connection | Specified Condition |
|---|---|
| Battery positive (+) → 5 (ILL+)
Battery negative (-) → 1 (ILL-) |
Indicator illuminates |
| *a | Component without harness connected
(Door Lock Unlock Switch) |
If the result is not as specified, replace the door lock unlock switch.