84535C
1.INSPECT DOOR LOCK SWITCH RH
Check the resistance.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 (L) - 2 (E) | Locked | Below 1 Ω |
| 1 (L) - 2 (E)
3 (UL) - 2 (E) |
OFF | 10 kΩ or higher |
| 3 (UL) - 2 (E) | Unlocked | Below 1 Ω |
| *a | LOCK |
| *b | OFF |
| *c | UNLOCK |
| *d | Component without harness connected
(Door Lock Switch RH) |
The name in brackets next to the terminal name displays the connector color.
Use the connector terminal shown in the illustration when performing an inspection without removing the door control switch from the front door lock.
If the result is not specified, replace the door lock switch RH.
69310
2.INSPECT FRONT DOOR LOCK ASSEMBLY RH
Check the operation of the door lock motor.
Apply battery voltage and check the operation of the front door lock assembly.
| Battery Connection | Specified Condition |
|---|---|
| Battery positive (+) → 5 (L)
Battery negative (-) → 4 (UL) |
LOCK |
| Battery positive (+) → 4 (UL)
Battery negative (-) → 5 (L) |
UNLOCK |
| *a | LOCK |
| *b | UNLOCK |
| *c | Component without harness connected
(Door Door Lock Assembly RH) |
If the result is not specified, replace the front door lock assembly RH.