Home › Vehicle Interior › DOOR LOCK › BACK DOOR LOCK(for Double Swing Out Type)
RM2850E _58 Vehicle Interior _073188 DOOR LOCK _0356161 BACK DOOR LOCK(for Double Swing Out Type) A

DOOR LOCK  BACK DOOR LOCK(for Double Swing Out Type)  INSTALLATION  


PROCEDURE

Hide 84535A 1.INSTALL DOOR LOCK SWITCH

a.

Attach the 2 pins to install the door lock switch.


b.

Install the door lock base plate with the screw.

Torque:

20 N*m (200 kgf*cm, 14 ft.*lbf)



Hide 2.INSTALL BODY GREASE

a.

Apply MP grease to the sliding parts of the back door lock assembly.


Hide 69350 3.INSTALL BACK DOOR LOCK ASSEMBLY

a.

Using a T30 "TORX" socket wrench, install the back door lock assembly with the 3 "TORX" screws.

Torque:

5.0 N*m (51 kgf*cm, 44 in.*lbf)



b.
B466857

Attach the snap and install the back door lock locking link to the back door lock control link silencer.


c.

Attach the snap and install the back door lock remote control open link to the back door lock control link silencer.


d.

Install the 2 links to the back door outside handle.


e.
B466855E02
2.375,0.854 2.688,1.052 0.313,0.198 10 false *A 1.083,1.49 1.396,1.688 0.313,0.198 10 false *B

Connect the each connector and clamp.

Text in Illustration
*A w/ Courtesy Switch
*B w/ Power Door Lock


Hide 67848 4.INSTALL BACK DOOR SERVICE HOLE COVER LH

Hide 67853C 5.INSTALL NO. 3 BACK DOOR SERVICE HOLE COVER

Hide 69291 6.INSTALL BACK DOOR INSIDE HANDLE ASSEMBLY

Hide 64790C 7.INSTALL BACK DOOR TRIM PANEL ASSEMBLY LH

Hide 68931 8.INSTALL NO. 1 BACK DOOR STAY (w/ No. 1 Back Door Stay)

Hide 69278D 9.INSTALL DOOR INSIDE HANDLE BEZEL LH