74611B
1.REMOVE ASSIST GRIP
68931
2.REMOVE NO. 1 BACK DOOR STAY (w/ No. 1 Back Door Stay)
67199
3.REMOVE BACK DOOR HANDLE COVER (w/ Handle)
67807
4.REMOVE BACK DOOR SERVICE HOLE COVER SUB-ASSEMBLY (w/o Handle)
69278D
5.REMOVE DOOR INSIDE HANDLE BEZEL LH (w/o Handle)
64790C
6.REMOVE BACK DOOR TRIM PANEL ASSEMBLY LH (w/ Handle)
64790C
7.REMOVE BACK DOOR TRIM PANEL ASSEMBLY LH (w/o Handle)
69212B
8.REMOVE BACK DOOR INSIDE HANDLE (w/o Handle)
67853C
9.REMOVE NO. 3 BACK DOOR SERVICE HOLE COVER (w/o Handle)
67848
10.REMOVE BACK DOOR SERVICE HOLE COVER LH
69350
11.REMOVE BACK DOOR LOCK ASSEMBLY (w/ Handle)
Disconnect the connector.
Using a T30 "TORX" socket wrench, remove the 3 "TORX" screws and back door lock assembly.
69350
12.REMOVE BACK DOOR LOCK ASSEMBLY (w/o Handle)
Disconnect the clamp and 2 connectors.
| *a | Courtesy Switch Connector |
| *b | Power Door Lock Connector |
Disconnect the 2 links from the back door outside handle.
Detach the snap and remove the back door lock remote control open link from the back door lock control link silencer.
Detach the snap and remove the back door lock lo cking link from the back door lock control link silencer.
Using a T30 "TORX" socket wrench, remove the 3 "TORX" screws and back door lock assembly.
84535A
13.REMOVE DOOR LOCK SWITCH
w/ Handle:
Remove the screw and door lock base plate.
Detach the 2 pins and remove the door lock switch.
w/o Handle:
Remove the screw and door lock base plate.
Detach the 2 pins and remove the door lock switch.