Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for RHD vehicles.
55560D
1.REMOVE SEAT UNDER TRAY LOCK ASSEMBLY
Remove the 2 screws and seat under tray lock assembly.
73230
2.REMOVE FRONT SEAT INNER BELT ASSEMBLY RH
71910A
3.REMOVE FRONT SEAT HEADREST ASSEMBLY
Push the front seat headrest support lock button to release the lock.
Pull up the front seat headrest assembly to remove it.
72525A
4.REMOVE RECLINING ADJUSTER RELEASE HANDLE RH
Remove the reclining adjuster release handle RH.
71811D
5.REMOVE FRONT SEAT CUSHION SHIELD RH
Remove the screw.
Slide the front seat cushion shield RH in the direction indicated by the arrow to detach the guide to remove it.
72791
6.REMOVE LUMBAR SUPPORT LEVER (w/ Lumbar Support)
Remove the snap ring as shown in the illustration.
Remove the lumbar support lever.
7.REMOVE FRONT SEATBACK ASSEMBLY
Remove the nut and 3 bolts and front seatback assembly.
| *A | LH Side |
| *B | RH Side |
|
Bolt |
|
Nut |
Remove the plate washer.
71073S
8.REMOVE SEPARATE TYPE FRONT SEATBACK COVER
Remove the 3 hog rings and open the separate type front seatback cover.
Remove the 2 hog rings and disconnect the lower part of the separate type front seatback cover.
Remove the 4 hog rings and disconnect the 2 rubber bands.
Roll up the separate type front seatback cover.
Remove the 3 hog rings and detach the 2 hooks.
| *a | Hog Ring |
| *b | Hook |
Detach the 4 claws and remove the 2 front seat headrest supports.
Roll up the separate type front seatback cover to remove it.
71551S
9.REMOVE SEPARATE TYPE FRONT SEATBACK PAD
Remove the separate type front seatback pad from the separate type front seatback spring assembly.
10.REMOVE SEATBACK COVER
Remove the 9 hog rings and seatback cover from the separate type front seatback spring assembly.
72750D
11.REMOVE LUMBAR SUPPORT ADJUSTER ASSEMBLY RH (w/ Lumbar Support)
Remove the 2 bolts and lumbar support adjuster assembly RH from the separate type front seatback spring assembly.
72510
12.REMOVE RECLINING SEATBACK ADJUSTER ASSEMBLY RH
Remove the 2 bolts and reclining seatback adjuster assembly RH from the separate type front seatback spring assembly.
71521
13.REMOVE FRONT SEAT CUSHION SILENCER PAD A
Remove the 2 front seat cushion silencer pads A from the separate type front seatback spring assembly.
14.REMOVE BUSH
Detach the 3 claws to remove the bush from the separate type front seat cushion spring assembly.
72110A
15.REMOVE FRONT SEAT OUTER TRACK ASSEMBLY RH
Remove together with the front seat inner track assembly RH.
Remove the bolts.
Operate the seat track adjusting handle to slide the front seat outer track assembly RH together with the front seat inner track assembly RH to the front most position.
Remove the 2 bolts.
Operate the seat track adjusting handle to slide the front seat outer track assembly RH together with the front seat inner track assembly RH to the rearmost position.
Remove the 2 bolts and front seat outer track assembly RH together with the front seat inner track assembly RH from the separate type front seat cushion spring assembly.
71149
16.REMOVE FRONT SEAT CUSHION CONNECTING WIRE
Remove the 2 bolts and front seat cushion connecting wire.
72301
17.REMOVE SEAT TRACK EQUALIZING WIRE SUB-ASSEMBLY
Remove the seat track equalizing wire sub-assembly as shown in the illustration.
71610S
18.REMOVE SEPARATE TYPE FRONT SEAT CUSHION SPRING ASSEMBLY
Remove the 14 hog rings and separate type front seat cushion spring assembly.
71071S
19.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER
Remove the 10 hog rings and separate type front seat cushion cover from the separate type front seat cushion pad RH.
71524
20.REMOVE FRONT SEAT CUSHION SILENCER PAD D
Remove the 2 front seat cushion silencer pads D from the separate type front seat cushion spring assembly.