Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for RHD vehicles.
The procedure listed below is for 1st row to 7th row for long body, and 1st row to 6th row for standard body.
2nd row seats are not installed to vehicles with cooler boxes.
The procedure listed below is a representative example.
Use the same procedure for all rows, unless otherwise specified.
71876E
1.REMOVE RECLINING ADJUSTER INSIDE COVER LH
for Hi-back Seat Type:
Remove the 2 screws.
w/o Reclining Function:
Using moulding remover A, detach the 7 claws and 2 guides.
w/ Reclining Function:
Using moulding remover A, detach the 6 claws and 2 guides.
except Hi-back Seat Type:
Remove the 2 screws.
Detach the guide and remove the reclining adjuster inside cover LH.
71812K
2.REMOVE RECLINING ADJUSTER COVER LH
for Hi-back Seat Type:
Remove the 2 screws.
for Type A:
Using moulding remover A, detach the 7 claws and 3 guides.
for Type B:
Using moulding remover A, detach the 7 claws and 2 guides.
w/ Reclining Function:
Pull out the seat reclining handle belt from the hole in the reclining adjuster cover LH.
Remove the reclining adjuster cover LH.
except Hi-back Seat Type:
Remove the 2 screws.
Detach the guide and remove the reclining adjuster inside cover LH.
73380A
3.REMOVE REAR SEAT INNER BELT ASSEMBLY (w/ Seat Belt)
73306
4.REMOVE REAR SEAT OUTER BELT ASSEMBLY (w/ Seat Belt)
72379
5.REMOVE SEAT RECLINING HANDLE BELT (w/ Reclining Function)
Remove the seat reclining handle belt from the No. 2 seatback spring assembly LH.
71148N
6.REMOVE REAR SEAT OUTER LEG COVER
Remove the 3 screws.
| *A | except 3rd Row Seat | *B | for 3rd Row Seat |
except 3rd Row Seat:
Using a clip remover with its tip wrapped with protective tape, detach the 4 clips.
|
Protective Tape | - | - |
Using moulding remover A, detach the 9 claws and 2 guides and remove the rear seat outer leg cover.
for 3rd Row Seat:
Using a clip remover with its tip wrapped with protective tape, detach the 2 clips.
|
Protective Tape | - | - |
Using moulding remover A, detach the 11 claws and guide and remove the rear seat outer leg cover.
71149K
7.REMOVE REAR SEAT INNER LEG COVER
Remove the screw.
| *A | for 3rd Row Seat | *B | except 3rd Row Seat |
for 3rd Row Seat:
Detach the claw and 2 guides and remove the rear seat inner leg cover.
except 3rd Row Seat:
Detach the 2 claws and 2 guides and remove the rear seat inner leg cover.
74617C
8.REMOVE ASSIST GRIP PLUG (w/ Assist Grip)
Use the same procedure for the other assist grip plugs.
Using a thin-bladed screwdriver with its tip wrapped with protective tape, detach the 2 claws and remove the assist grip plug.
|
Protective Tape |
74610A
9.REMOVE ASSIST GRIP SUB-ASSEMBLY (w/ Assist Grip)
Remove the 2 screws and assist grip sub-assembly.
74130C
10.REMOVE REAR ASH RECEPTACLE ASSEMBLY (w/ Ashtray)
Remove the ash receptacle assembly.
74145A
11.REMOVE REAR ASH RECEPTACLE PLATE (w/ Ashtray)
Remove the 2 screws and rear ash receptacle plate.
79209
12.REMOVE NO. 2 SEATBACK BOARD SUB-ASSEMBLY (w/ Seatback Board)
Slide the No. 2 seatback board sub-assembly in the direction indicated by the arrow shown in the illustration and detach the 3 guides to remove it.
79014
13.REMOVE NO. 1 SEATBACK COVER SUB-ASSEMBLY LH
for Hi-back Seat Type:
Remove the 3 hog rings.
| *A | w/o Seatback Board | *B | w/ Seatback Board |
w/o Seatback Board:
Pull out the fastener.
Open the fastener.
Remove the 2 hog rings.
Remove the 2 hog rings and No. 1 seatback cover sub-assembly LH.
for Middle-back Seat Type:
Remove the 3 hog rings.
Remove the 4 hog rings and No. 1 seatback cover sub-assembly.
for Low-back Seat Type:
Remove the 3 hog rings.
Remove the 2 hog rings and No. 1 seatback cover sub-assembly.
79018A
14.REMOVE NO. 1 SEATBACK PAD SUB-ASSEMBLY LH
Remove the No. 1 seatback pad sub-assembly LH.
| *A | for Low-back Seat Type | *B | for Middle-back Seat Type |
| *C | for Hi-back Seat Type | - | - |
79012
15.REMOVE NO. 1 SEAT CUSHION COVER SUB-ASSEMBLY LH
Detach the fastening tape and fold back the No. 1 seat cushion cover sub-assembly LH.
|
Fastening Tape |
for Type A:
Detach the 5 hooks.
for Type B:
Detach the 6 hooks.
for Long Body 5th Row Seat:
for Standard Body 4th Row Seat:
Pull out the strap of the No. 1 seat cushion cover sub-assembly LH from the No. 1 seat leg sub-assembly LH.
Remove the No. 1 seat cushion cover sub-assembly LH with pad from the No. 1 seat leg sub-assembly LH.
for Hi-back Seat Type:
Detach the 3 pieces of fastening tape.
|
Fastening Tape |
except Hi-back Seat Type:
Detach the fastening tape.
|
Fastening Tape |
Remove the strap of the No. 1 seat cushion cover sub-assembly LH from the No. 1 seat cushion pad LH.
Remove the 6 hog rings and No. 1 seat cushion cover LH from the No. 1 seat cushion pad sub-assembly LH.
71868C
16.REMOVE REAR NO. 1 SEAT INNER CUSHION SHIELD LH (for Hi-back Seat Type)
Remove the screw and rear No. 1 seat inner cushion shield LH.
71867M
17.REMOVE REAR NO. 1 SEAT INNER CUSHION SHIELD RH (for Hi-back Seat Type)
Remove the screw and rear No. 1 seat inner cushion shield RH.
79967K
18.REMOVE REAR NO. 4 SEAT LEG SIDE COVER (for 1st and 2nd Row)
Using a thin-bladed screwdriver with its tip wrapped with protective tape, detach the 3 claws and remove the rear No. 4 seat leg side cover.
|
Protective Tape |
79967B
19.REMOVE REAR NO. 2 SEAT LEG SIDE COVER (for 1st and 2nd Row)
Slide the rear No. 2 seat leg side cover in the direction indicated by the arrow shown in the illustration and remove it.
79968
20.REMOVE REAR NO. 5 SEAT LEG SIDE COVER (for 2nd Row)
Detach the 2 hooks and slide the rear No. 5 seat leg side cover in the direction indicated by the arrow shown in the illustration and remove it.
72345A
21.REMOVE RECLINING CONNECTING PIPE
Remove the reclining connecting pipe.
71875G
22.REMOVE SEAT RECLINING ADJUSTER INSIDE COVER LH (w/ Reclining Function)
Using a clip remover, detach the clip.
Detach the 4 guides and remove the seat reclining adjuster inside cover LH.
79290A
23.REMOVE NO. 2 SEATBACK SPRING ASSEMBLY LH
for Hi-back Seat Type:
Remove the 3 bolts.
Detach the 2 guides and remove the No. 2 seatback spring assembly LH.
except Hi-back Seat Type:
w/o Seat Belt:
Remove the 4 bolts.
Detach the 2 guides and remove the No. 2 seatback spring assembly LH.
w/ Seat Belt:
Remove the 2 bolts.
Detach the 2 guides and remove the No. 2 seatback spring assembly LH.