Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for RHD and LHD vehicles.
The procedures listed below are for RHD vehicles.
78904
1.INSTALL NO. 2 FOLD SEAT LOCK STRIKER SUB-ASSEMBLY
Install the No. 2 fold seat lock striker sub-assembly with the 3 nuts.
39 N*m (400 kgf*cm, 29 ft.*lbf)
78903
2.INSTALL FOLD SEAT LEG LOCK STRIKER SUB-ASSEMBLY
Use the same procedure described for the No. 2 fold seat lock striker sub-assembly.
79916
3.INSTALL NO. 2 SEAT LEG BRACKET
Install the No. 2 seat leg bracket with the 2 nuts.
39 N*m (400 kgf*cm, 29 ft.*lbf)
79915
4.INSTALL SEAT LEG BRACKET
Use the same procedure described for the No. 2 seat leg bracket.
5.INSTALL NO. 8 SEAT ASSEMBLY
2 or more persons are required for the following procedures in order to prevent damage of the vehicle interior.
Place the No. 8 seat assembly in the cabin.
Set the No. 8 seat assembly in place.
Install the 4 nuts.
39 N*m (400 kgf*cm, 29 ft.*lbf)
Connect the 2 No. 1 fold seat stopper band assemblies with the 2 bolts.
39 N*m (400 kgf*cm, 29 ft.*lbf)
| *A | LH Side | *B | RH Side |
|
Nut |
|
Bolt |
Return the No. 8 seat assembly to its original position.
79805A
6.INSTALL FRONT FOLD SEAT LEG SUB-ASSEMBLY
Install the front fold seat leg sub-assembly with the 2 bolts.
39 N*m (400 kgf*cm, 29 ft.*lbf)
79097
7.INSTALL LUGGAGE COMPARTMENT WALL PARTITION SUB-ASSEMBLY
Install the luggage compartment wall partition sub-assembly with 3 new bolts and 5 screws.
10 N*m (102 kgf*cm, 7 ft.*lbf)
|
Screw |
|
Bolt |
|
Fastener |
Attach the 9 fasteners.
8.INSTALL REAR NO. 1 SEAT ASSEMBLY LH
9.INSTALL REAR NO. 1 SEAT ASSEMBLY RH