Wear protective gloves. Sharp areas on the parts may injure your hands.
Use the same procedure for RHD and LHD vehicles.
The procedures listed below are for RHD vehicles.
1.REMOVE REAR NO. 1 SEAT ASSEMBLY RH
2.REMOVE REAR NO. 1 SEAT ASSEMBLY LH
79097
3.REMOVE LUGGAGE COMPARTMENT WALL PARTITION SUB-ASSEMBLY
Remove the 5 screws.
|
Screw |
|
Bolt |
Remove the 3 bolts and luggage compartment wall partition sub-assembly.
62609A
4.REMOVE LUGGAGE PARTITION BOARD SUB-ASSEMBLY
Remove the 4 clips and luggage partition board sub-assembly.
5.REMOVE NO. 8 SEATBACK ASSEMBLY LH
Remove the 2 bolts and 2 nuts.
2 or more persons are required for the following procedures in order to prevent damage of the vehicle interior.
|
Nut |
|
Bolt |
Lift up and remove the No. 8 seatback assembly LH from the vehicle.
6.REMOVE NO. 8 SEATBACK ASSEMBLY RH
Use the same procedure described for the LH side.
79805A
7.REMOVE FRONT FOLD SEAT LEG SUB-ASSEMBLY
Remove the 2 bolts and front fold seat leg sub-assembly.
8.REMOVE NO. 8 SEAT CUSHION ASSEMBLY
Remove the 4 nuts.
2 or more persons are required for the following procedures in order to prevent damage of the vehicle interior.
| *A | LH Side | *B | RH Side |
Lift up and remove the No. 8 seat cushion assembly.