Use the same procedure for RHD and LHD vehicles.
The procedures listed below are for RHD vehicles.
73210
1.INSPECT FRONT SEAT OUTER BELT ASSEMBLY RH
Do not disassemble the retractor.
Before installing the front seat outer belt assembly RH, check the ELR.
When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks. If the operation is not as specified, replace the front seat outer belt assembly RH.
| *a | Unlocked |
| *b | Locked |
| *c | 45° |