Home › Vehicle Exterior › HORN › HORN RELAY
RM2850E _59 Vehicle Exterior _073192 HORN _0356191 HORN RELAY G

HORN  HORN RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 86530 1.INSPECT HORN RELAY ASSEMBLY

a.
E209082

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied 10 kΩ or higher
Battery voltage applied to terminal 1 and 2 Below 1 Ω


If the result is not as specified, replace the relay.