Be sure to follow the correct removal and installation procedures of the instrument panel passenger airbag assembly.
73970A
1.INSPECT INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)
Perform a diagnostic system check.
for 2 Connectors Type:
for 3 Connectors Type:
Visually check for defects with the instrument panel passenger airbag installed on the vehicle.
The defects are as follows:
Cuts on the instrument panel passenger airbag assembly
Small cracks on the instrument panel passenger airbag assembly
Significant discoloration on the instrument panel passenger airbag assembly
No defects are found.
If any of the defects is found, replace the instrument panel passenger airbag assembly with a new one.
73970A
2.INSPECT INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)
Perform a diagnostic system check.
for 2 Connectors Type:
for 3 Connectors Type:
Visually check for defects with the instrument panel passenger airbag assembly removed from the vehicle.
The defects are as follows:
Cuts on the instrument panel passenger airbag assembly
Small cracks on the instrument panel passenger airbag assembly
Significant discoloration on the instrument panel passenger airbag assembly
Cracks or other damage to the connector
Deformation or cracks on the instrument panel or instrument panel reinforcement
No defects are found.
If any of the defects is found, replace the instrument panel passenger airbag assembly, instrument panel or instrument panel reinforcement with a new one.