Be sure to follow the correct removal and installation procedures of the front airbag sensor.
89173
1.INSPECT FRONT AIRBAG SENSOR (for Vehicle not Involved in Collision)
Perform a diagnostic system check.
for 2 Connectors Type:
for 3 Connectors Type:
89173
2.INSPECT FRONT AIRBAG SENSOR (for Vehicle Involved in Collision and Airbag not Deployed)
Perform a diagnostic system check.
for 2 Connectors Type:
for 3 Connectors Type:
Visually check the front airbag sensor assembly for defects if the front bumper of the vehicle or the area around the bumper is damaged.
The defects are as follows:
Cracks on the sensor housing
Dents on the sensor housing
Chips on the sensor housing
Cracks or other damage to the connector
Damage to the serial number
No defects are found.
If any of the defects is found, replace the front airbag sensor with a new one.
89173
3.INSPECT FRONT AIRBAG SENSOR (Vehicle Involved in Collision and Airbag is Deployed)
When airbags have deployed as the result of a collision, be sure to replace the front airbag sensor assembly when it is in a damaged area (anywhere in need of repair).
Visually check the front airbag sensor when it is in an undamaged area for defects.
The defects are as follows:
Cracks on the sensor housing
Dents on the sensor housing
Chips on the sensor housing
Cracks or other damage to the connector
Damage to the serial number
No defects are found.
any of the defects is found or a front airbag sensor has detected a major collision, replace the front airbag sensor with a new one.