64563
1.REMOVE INNER BACK DOOR WINDOW EMERGENCY GLASS WEATHERSTRIP (for Emergency Door)
Using a screwdriver, remove the inner back door window emergency glass weatherstrip from the outer back door window emergency glass weatherstrip.
Tape the screwdriver tip before use.
64562
2.REMOVE OUTER BACK DOOR WINDOW EMERGENCY GLASS WEATHERSTRIP (for Emergency Door)
Using a moulding remover A, remove the outer back door window emergency glass weatherstrip from the door panel.
68129B
3.REMOVE EMERGENCY BACK DOOR WINDSHIELD GLASS (for Emergency Door)
Remove the emergency back door windshield glass from the outer back door window emergency glass weatherstrip.
87950
4.REMOVE OUTER UNDER REAR VIEW MIRROR ASSEMBLY (w/ Outer Under Rear View Mirror)
62384P
5.REMOVE SIDE WINDOW CLIP CAP
Remove the side window clip cap.
67754
6.REMOVE BACK DOOR TRIM MOULDING
Remove the back door trim moulding.
68131D
7.REMOVE BACK DOOR GLASS LH
The back door glass LH may fall while performing this procedure. Therefore, use suction cups to hold the back door glass LH from the outside of the vehicle.
Apply protective tape to the outer surface of the door panel to prevent scratches.
| *1 | Protective Tape |
Install the suction cups to the back door glass LH.
From the interior, insert a piano wire between the door panel and glass.
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
When separating the glass from the vehicle, Do not damage the vehicle paint or interior/exterior ornaments.
| *A | w/o Outer Under Rear View Mirror | *B | w/ Outer Under Rear View Mirror |
| *1 | Back Window Glass Clip LH | *2 | Back Window Glass Clip RH |
| *3 | Piano Wire | - | - |
Cut through the adhesive by pulling the piano wire around the glass.
Using suction cups, disconnect the 2 back window glass clips LH and 2 back window glass clips RH and remove the back door glass LH.
Be careful not to drop the back door glass LH.
| *A | w/o Outer Under Rear View Mirror | *B | w/ Outer Under Rear View Mirror |
75574B
8.REMOVE BACK WINDOW OUTSIDE MOULDING LH
When reusing the back door glass LH:
Using a scraper, remove the back window outside moulding LH.
Do not damage the back door glass LH.
Be sure to replace the back window outside moulding LH with a new one.
| *A | w/ Outer Under Rear View Mirror | *B | w/o Outer Under Rear View Mirror |
| *a | Back Side | - | - |
64813B
9.REMOVE BACK WINDOW GLASS ADHESIVE DAM
When reusing the back door glass LH:
Using a scraper, remove the back window glass adhesive dam.
Do not damage the back door glass LH.
Be sure to replace the back window glass adhesive dam with a new one.
| *A | w/o Outer Under Rear View Mirror | *B | w/ Outer Under Rear View Mirror |
| *a | Back Side | - | - |
68294A
10.REMOVE BACK DOOR GLASS ADHESIVE DAM
When reusing the back door glass LH:
Do not damage the back door glass LH.
Be sure to replace the back door glass adhesive dam with a new one.
w/o Outer Under Rear View Mirror:
Using a scraper, remove the 4 back door glass adhesive dams.
| *A | w/o Outer Under Rear View Mirror | *B | w/ Outer Under Rear View Mirror |
| *a | Back Side | - | - |
w/ Outer Under Rear View Mirror:
Using a scraper, remove the 3 back door glass adhesive dams.
64828
11.REMOVE BACK WINDOW GLASS CLIP LH
When reusing the back door glass LH:
Using a scraper, remove the back window glass clip LH.
Do not damage the back door glass LH.
Be sure to replace the back window glass clip LH with a new one.
| *A | w/ Outer Under Rear View Mirror | *B | w/o Outer Under Rear View Mirror |
| *a | Back Side | - | - |
64827A
12.REMOVE BACK WINDOW GLASS CLIP RH
When reusing the back door glass LH:
Using a scraper, remove the back window glass clip RH.
Do not damage the back door glass LH.
Be sure to replace the back window glass clip RH with a new one.
| *A | w/o Outer Under Rear View Mirror | *B | w/ Outer Under Rear View Mirror |
| *a | Back Side | - | - |