84790
1.INSPECT REAR WINDOW DEFOGGER SWITCH ASSEMBLY
Inspect the rear window defogger switch assembly.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1(B) - 4(E) | Switch OFF | 10 kΩ or higher |
| 1(B) - 4(E) | Switch ON | Below 1 Ω |
If the result is not as specified, replace the rear window defogger switch assembly.
| *a | Component without harness connected
(Rear Window Defogger Switch Assembly) |
Inspect the indicator.
Apply battery voltage to the connector and check the indicator illumination condition.
| Battery Connection | Specified Condition |
|---|---|
| Battery positive → 1(B)
Battery negative → 5(D) |
Illuminated |
If the result is not as specified, replace the rear window defogger switch assembly.
| *a | Component without harness connected
(Rear Window Defogger Switch Assembly) |
| *b | Indicator |
Inspect the illumination.
Apply battery voltage to the connector and check the light illumination condition.
| Battery Connection | Specified Condition |
|---|---|
| Battery positive → 3(ILL+)
Battery negative → 2(ILL-) |
Illuminated |
If the result is not as specified, replace the rear window defogger switch assembly
| *a | Component without harness connected
(Rear Window Defogger Switch Assembly) |
| *b | Illumination |