Home › Vehicle Exterior › WINDOW / GLASS › WINDOW DEFOGGER WIRE
RM2850E _59 Vehicle Exterior _073195 WINDOW / GLASS _0356206 WINDOW DEFOGGER WIRE G

WINDOW / GLASS  WINDOW DEFOGGER WIRE  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT BACK WINDOW GLASS (DEFOGGER WIRE), BACK DOOR GLASS (DEFOGGER WIRE)

NOTICE:
B066134E51
3,2.042 3.417,2.146 0.417,0.104 1.938,1.219 1.74,1.708 false 0.75,0.583 0.5,0.583 0.5,0.583 0.5,1.083 false 2.917,1.333 2.906,0.75 false 1.615,1.792 1.875,1.969 0.26,0.177 10 false *2 2.833,1.385 3.042,1.635 0.208,0.25 10 false *1 0.802,0.49 1.052,0.667 0.25,0.177 10 false *3

·

When cleaning the glass, wipe the glass along the wire using a soft, dry cloth. Take care not to damage the defogger wires.

·

Do not use detergents or glass cleaners that have abrasive ingredients.

·

When measuring voltage, wrap a piece of tin foil around the tip of the negative (-) tester probe and press the foil against the wire with your finger as shown in the illustration.



Text in Illustration
*1 Defogger Wire
*2 Tin Foil
*3 Tester Probe

a.

Turn the ignition switch to ON.


b.

Turn the defogger switch on.


c.
B119840E15
2.333,0.594 1.271,1 true 1.052,0.927 1.26,1.115 0.208,0.188 10 false *a

B119841E13
2.25,1.052 1.844,1.896 false 0.896,0.771 1.271,0.771 1.271,0.771 1.729,1.094 false 3.063,0.125 3.115,0.125 3.115,0.125 3.115,0.969 false 2.396,0.708 2.563,0.708 2.563,0.708 2.563,0.958 false 3.25,1.646 2.708,3.073 2.708,3.073 2.427,3.073 false 1.146,0.208 1.281,0.208 1.281,0.208 1.729,0.531 false 0.917,0.125 1.083,0.323 0.167,0.198 10 false *a 0.635,0.688 0.885,1 0.25,0.313 10 false *b 2.875,0.042 3.135,0.271 0.26,0.229 10 false *c 2.198,0.625 2.438,0.844 0.24,0.219 10 false *d 1.656,1.781 1.813,2.052 0.156,0.271 10 false *e 2.26,3 2.438,3.177 0.177,0.177 12 false *f

Measure the voltage at the center of each defogger wire as shown in the illustration.

Standard:
Voltage Criteria
Approx. 5 V Wire is not broken
Approx. 10 or 0 V Wire is broken


Text in Illustration
*a Center

HINT:

If there is approximately 10 V, the wire may be faulty between the center of the wire and the wire end on the battery side. If there is no voltage, the wire may be faulty between the center of the wire end and the wire end on the ground side.



d.

Place the voltmeter positive (+) lead against the defogger wire on the battery side.


e.

Place the voltmeter negative (-) lead with the foil strip against the wire on the ground side.


f.

Slide the positive (+) lead from the battery side to the ground side.


g.

The point where the voltage drops from approximately 10 V to 0 V is where the defogger wire is broken.

HINT:

If the defogger wire is not broken, the voltmeter indicates 0 V at the positive (+) end of the defogger wire and gradually increases to approximately 12 V as the meter probe moves to the other end.


Text in Illustration
*a Ground Side
*b Foil Strip
*c Approximately 10 V
*d 0 V
*e Broken Wire
*f Battery Side