62384P
1.REMOVE SIDE WINDOW CLIP CAP
Remove the side window clip cap.
67754
2.REMOVE BACK DOOR TRIM MOULDING
Remove the back door trim moulding.
68131
3.REMOVE BACK DOOR GLASS
The back door glass may fall while performing this procedure. Therefore, use suction cups to hold the back door glass from the outside of the vehicle.
Apply protective tape to the outer surface of the door panel to prevent scratches.
| *1 | Protective Tape |
Install the suction cups to the back door glass.
From the interior, insert a piano wire between the door panel and glass.
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
When separating the glass from the vehicle, Do not damage the vehicle paint or interior/exterior ornaments.
| *1 | Back Window Glass Clip LH |
| *2 | Back Window Glass Clip RH |
| *3 | Piano Wire |
Cut through the adhesive by pulling the piano wire around the glass.
Using suction cups, disconnect the 2 back window glass clips LH and 2 back window glass clips RH and remove the back door glass.
Be careful not to drop the back door glass.
75573C
4.REMOVE BACK WINDOW OUTSIDE MOULDING
When reusing the back door glass:
Using a scraper, remove the back window outside moulding.
Do not damage the back door glass.
Be sure to replace the back window outside moulding with a new one.
| *a | Back Side |
64813B
5.REMOVE BACK WINDOW GLASS ADHESIVE DAM
When reusing the back door glass:
Using a scraper, remove the back window glass adhesive dam.
Do not damage the back door glass.
Be sure to replace the back window glass adhesive dam with a new one.
| *a | Back Side |
68294A
6.REMOVE BACK DOOR GLASS ADHESIVE DAM
When reusing the back door glass:
Using a scraper, remove the 3 back door glass adhesive dams.
Do not damage the back door glass.
Be sure to replace the back door glass adhesive dam with a new one.
| *a | Back Side |
64827B
7.REMOVE BACK WINDOW GLASS CLIP RH
When reusing the back door glass:
Using a scraper, remove the 2 back window glass clips RH.
Do not damage the back door glass.
Be sure to replace the back window glass clip RH with a new one.
| *a | Back Side |
64828A
8.REMOVE BACK WINDOW GLASS CLIP LH
When reusing the back door glass:
Using a scraper, remove the 2 back window glass clips LH.
Do not damage the back door glass.
Be sure to replace the back window glass clip LH with a new one.
| *a | Back Side |