62785S
1.REMOVE SIDE WINDOW GLASS SPACER
When reusing the rear side front window glass RH:
Do not damage the rear side front window glass RH.
Be sure to replace the side window glass space with a new one.
Using a scraper, remove the 4 side window glass spacers.
| *a | Back Side |
62763R
2.REMOVE SIDE WINDOW FRAME RETAINER
When reusing the rear side front window glass RH:
Do not damage the rear side front window glass RH.
Be sure to replace the side window frame retainer with a new one.
Using a scraper, remove the 4 side window frame retainers.
| *a | Back Side |
62391E
3.REMOVE NO. 1 SIDE WINDOW STOPPER (for Slide Type)
Be sure to replace the removed No. 1 side window stopper with a new one.
Remove the 4 screws and the 2 pieces of No. 1 side window stopper.
| *1 | No. 1 Side Window Stopper | - | - |
62211J
4.REMOVE FRONT SIDE WINDOW GLASS RH (for Slide Type)
When reusing the rear side front window glass RH:
Do not damage the rear side front window glass RH.
Do not damage the window frame
Do not damage the front side window glass RH.
Move the front side window glass RH and rear side window glass RH to the center.
Remove the 2 screws.
Remove any old sealant sticking to the head of the screw before removing it.
Widen top and bottom of the window frame using your hands and remove the front side window glass RH.
62211K
5.REMOVE REAR SIDE WINDOW GLASS RH (for Slide Type)
When reusing the rear side front window glass RH:
Do not damage the rear side front window glass RH.
Do not damage the window frame.
Do not damage the rear side window glass RH.
Remove the 2 screws and center side window frame sub-assembly.
Widen top and bottom of the window frame using your hands and remove the rear side window glass RH.
62777D
6.REMOVE SIDE WINDOW CENTER SASH CAP (for Slide Type)
Perform the following procedures when replacing the side window center sash cap.
Be sure to replace the removed side window center sash cap with a new one.
Remove the side window center sash cap.
62910Q
7.REMOVE SIDE WINDOW LOCK ASSEMBLY (for Slide Type)
Use the same procedure for each of the side window lock assemblies.
Remove the 2 screws and side window lock assembly.
Remove the side window lock retainer.
Remove the side window lock packing.
62746G
8.REMOVE QUARTER WINDOW PACKING (for Slide Type)
Perform the following procedures when replacing the quarter window packing.
Be sure to replace the removed quarter window packing with a new one.
Make sure that the side window center frame sub-assembly RH is not deformed when removing the quarter window packing.
The quarter window packing is installed with adhesive.
Remove the EPT sealer shown in the illustration from the side window center frame sub-assembly RH.
Replace the removed EPT sealer with a new one.
A generic EPT sealer can be used.
Remove the quarter window packing from the side window center frame sub-assembly RH.
62451G
9.REMOVE REAR SIDE WINDOW RUN RH (for Slide Type)
Perform the following procedures when replacing the rear side window run RH.
Be sure to replace the removed rear side window run RH with a new one.
The rear side window run RH is installed with adhesive.
Remove the rear side window run RH.
62269H
10.REMOVE SIDE WINDOW FRAME FILM
Perform the following procedures when replacing the side window frame film.
Be sure to replace the removed side window frame film with a new one.
Remove the 10 pieces of side window frame film.
|
Tape | - | - |