Home › Audio / Visual / Telematics › AUDIO / VIDEO › RADIO RECEIVER
RM2850E _56 Audio / Visual / Telematics _073196 AUDIO / VIDEO _0356222 RADIO RECEIVER A

AUDIO / VIDEO  RADIO RECEIVER  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for RHD vehicles.



PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION


Hide 55410C 3.REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY

Hide 86120 4.REMOVE RADIO RECEIVER ASSEMBLY

a.
E364246

Remove the 4 bolts.


b.

Disconnect the connectors and remove the radio receiver assembly.


Hide 86211 5.REMOVE NO. 1 RADIO BRACKET

a.
E355238

Remove the 3 screws and No. 1 radio bracket.


Hide 86212 6.REMOVE NO. 2 RADIO BRACKET

a.
E355239

Remove the 3 screws and No. 2 radio bracket.