55480D
1.REMOVE LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY
86300
2.REMOVE ANTENNA ASSEMBLY WITH HOLDER
for RHD:
Detach the antenna cord sub-assembly from the clamp and disconnect the connector.
for LHD:
Detach the antenna cord sub-assembly from the clamp and disconnect the connector.
Tie the connector of the antenna assembly with holder with the string.
| *1 | String |
Use string that is longer than the antenna assembly with holder.
Remove the 2 screws and antenna assembly with holder from the vehicle together with the string.
Leave the string passed through the pillar as it will be used again during installation.