86150
1.INSPECT NO. 1 SPEAKER ASSEMBLY WITH BOX
With the speaker in the installed condition, check there are no abnormalities such looseness or rattling.
Check that there is no foreign matter inside the speaker.
Check that the speaker cone is not damaged.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | Always | 8 Ω |
| *a | Component without harness connected
(No. 1 Speaker Assembly with box) |
If the result is not as specified, replace the No. 1 speaker assembly with box.
86150B
2.INSPECT NO. 2 SPEAKER ASSEMBLY WITH BOX
With the speaker in the installed condition, check there are no abnormalities such looseness or rattling.
Check that there is no foreign matter inside the speaker.
Check that the speaker cone is not damaged.
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1 - 2 | Always | 8 Ω |
| *a | Component without harness connected
(No. 2 Speaker Assembly with box) |
If the result is not as specified, replace the No. 2 speaker assembly with box.