1.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2.DRAIN POWER STEERING FLUID
3.REMOVE NO. 1 ENGINE UNDER COVER
44348A
4.SEPARATE NO. 1 OIL RESERVOIR TO PUMP HOSE
Slide the clip and disconnect the No. 1 oil reservoir to pump hose.
44411
5.SEPARATE PRESSURE FEED HOSE
Remove the union bolt, then disconnect the pressure feed hose.
Remove the gasket from the pressure feed hose.
44310
6.REMOVE VANE PUMP ASSEMBLY
Remove the 2 bolts and vane pump assembly.
Remove the O-ring from the vane pump assembly.