45440
1.DISCONNECT DRAG LINK
Remove the cotter pin and nut.
Using SST, disconnect the drag link from the pitman arm.
45210
2.DISCONNECT STEERING MAIN SHAFT ASSEMBLY
3.DISCONNECT TUBE CLAMP
Remove the bolt.
4.DISCONNECT PRESSURE FEED TUBE AND RETURN TUBE
Using SST, disconnect the pressure feed tube.
SST
09631-22020
Using SST, disconnect the return tube.
SST
09631-22020
44110
5.REMOVE PS GEAR ASSEMBLY
Remove the 4 bolts, nuts and washers.