Home › Steering › STEERING GEAR / LINKAGE › STEERING GEAR
RM2850E _55 Steering _073199 STEERING GEAR / LINKAGE _0356236 STEERING GEAR N

STEERING GEAR / LINKAGE  STEERING GEAR  ADJUSTMENT  


PROCEDURE

Hide 44015 1.ADJUST SECTOR SHAFT THRUST CLEARANCE

a.
C398024

Using a chiesel and hammer unstake the lock nut.


b.
C398025

Using a SST, remove the lock nut.

SST
09630-00015  (09631-00051)


c.

Using a hexagon wrench, adjust the adjusting screw for correct thrust clearance.


d.

Using SST, tighten a new lock nut.


e.

Using dial indicator, measure the thrust clearance.

Maximum clearance:

0.015 mm (0.0059 in.)


If the clearance exceed the standard, adjust again.


f.
C398026

Stake the lock nut.