Home › Engine / Hybrid System › 1BZ-FPE (FUEL) › INJECTOR › 2017.01–2021.01
RM2850E _51 Engine / Hybrid System _073202 1BZ-FPE FUEL _0356255 INJECTOR G

1BZ-FPE FUEL  INJECTOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT STARTING OPERATION

a.
A422071

Put a sound scope on the injector.


b.

Check the operating noise of the injector while cranking the engine.

Standard:

The operating noise occurs.


Reference:

Injecting twice per engine revolution while cranking the engine.



Hide 2.INSPECT IDLE SPEED OPERATION

a.

Start the engine.


b.

Put a sound scope on the injector, and check the operating noise. Or at the idle speed, grasp the injector hose with fingers and check the pulsation.

Standard:

The operating noise or pulsation occurs.



c.
A422072

Inspect the idling condition while disconnecting and connecting the connector of the injector.

Standard:

The engine speed decreases when disconnecting the connector.