Home › Engine / Hybrid System › 1BZ-FPE (FUEL) › AIR-FUEL RATIO CONTROL MOTOR › 2017.01–2021.01
RM2850E _51 Engine / Hybrid System _073202 1BZ-FPE FUEL _0356259 AIR-FUEL RATIO CONTROL MOTOR G

1BZ-FPE FUEL  AIR-FUEL RATIO CONTROL MOTOR  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 26280 1.INSPECT AIR FUEL RATIO CONTROL MOTOR OPERATING NOISE

a.

Start the engine.


b.

Check the operating noise when turning the ignition switch OFF and stopping the engine.

Standard:

Clicking noise occurs for several seconds.



Hide 26280 2.INSPECT AIR FUEL RATIO CONTROL MOTOR OPERATION

a.

Remove the air fuel ratio control motor.

HINT:

Do not disconnect the connector.



b.

Plug the air fuel ratio control motor installation contact of the carburetor with masking tape.


c.
A422081

Measure dimension (A), with the engine stopped and at the idle speed.

Standard length:

13 - 14 mm (0.51 - 0.55 in.) with the engine stopped

14 - 18 mm (0.55 - 0.71 in.) at the idle speed


NOTICE:

Do not apply excessive force to the shaft of the air fuel ratio control valve.