Home › Engine / Hybrid System › 1BZ-FPE (FUEL) › VACUUM SENSOR › 2017.01–2021.01
RM2850E _51 Engine / Hybrid System _073202 1BZ-FPE FUEL _0356265 VACUUM SENSOR G

1BZ-FPE FUEL  VACUUM SENSOR  INSPECTION  


PROCEDURE

Hide 89421 1.INSPECT POWER SOURCE VOLTAGE OF VACUUM SENSOR

a.

Disconnect the vacuum sensor connector.


b.

Turn the ignition switch ON.


c.
A422092

Using a voltmeter, measure the voltage between terminals VC and E2 of the vacuum sensor connector.

Voltage:

4.5 - 5.5 V



d.

Reconnect the vacuum sensor connector.


Hide 89421 2.INSPECT POWER OUTPUT OF VACUUM SENSOR

a.

Disconnect the vacuum hose from the vacuum sensor.


b.

Turn the ignition switch ON.


c.
A422093

Using a voltmeter, measure the voltage between terminals PIM and E2 of the Engine ECU.

Voltage:

3.3 - 3.9 V



d.

Apply vacuum to the vacuum sensor in 67 kPa (500 mmHg, 19.69 in. Hg).


e.

Measure the voltage between terminals PIM and E2 of the Engine ECU.

Voltage:

1.3 - 1.9 V