16100
1.INSTALL WATER PUMP
Connect the water bypass hose to the water pump.
Install a new gasket and the water pump with the 5 bolts.
25 N*m (255 kgf*cm, 18 ft*lbf)
16577C
2.INSTALL RADIATOR PIPE
Connect the radiator hose to the water pump.
Install the radiator pipe with 2 bolts.
21 N*m (214 kgf*cm, 15 ft*lbf)
16210
3.INSTALL WATER PUMP PULLEY, FLUID COUPLING, FAN AND DRIVE BELT(S)
Install the fan to the fluid coupling with 4 new nuts.
6.5 N*m (66 kgf*cm, 57 in.*lbf)
Temporarily install the pump pulley, the fluid fan and couplingassembly with the 4 nuts.
Install and adjust the drive belt(s) with the alternator adjustingbolt and pivot bolt (Click here @@-@@).
18.5 N*m (189 kgf*cm, 14 ft*lbf)
37.5 N*m (382 kgf*cm, 28 ft*lbf)
Tighten the 4 water pump pulley nuts.
18.5 N*m (189 kgf*cm, 14 ft*lbf)
4.FILL WITH ENGINE COOLANT
5. START ENGINE, AND CHECK FOR COOLANT LEAKS