Home › Engine / Hybrid System › 1BZ-FPE (COOLING) › THERMOSTAT › 2017.01–2021.01
RM2850E _51 Engine / Hybrid System _073203 1BZ-FPE COOLING _0356271 THERMOSTAT G

1BZ-FPE COOLING  THERMOSTAT  INSPECTION  


PROCEDURE

Hide 16331A 1.INSPECT THERMOSTAT

HINT:
A422114

The thermostat is numbered with the valve opening temperature.


a.
A422115

Immerse the thermostat in water and gradually heat the water.


b.

Check the valve opening temperature.

Valve opening temperature:

80 - 84 °C (176 - 183 °F)


If the valve opening temperature is not as specified, replace the thermostat.


c.
A422116

Check the valve lift.

Valve lift:

10 mm (0.39 in.) or more at 95 °C (203 °F)


If the valve lift is not as specified, replace the thermostat.


d.

Check that the valve spring is tight when the thermostat is fully closed.

If not closed, replace the thermostat.