Home › Engine / Hybrid System › 1BZ-FPE (COOLING) › THERMOSTAT › 2017.01–2021.01
RM2850E _51 Engine / Hybrid System _073203 1BZ-FPE COOLING _0356271 THERMOSTAT A

1BZ-FPE COOLING  THERMOSTAT  INSTALLATION  


PROCEDURE

Hide 16331A 1.PLACE THERMOSTAT IN WATER OUTLET HOUSING

a.
A422117

Install a new gasket to the thermostat.


b.

Insert the thermostat body between the water outlet housing protrusions.


Hide 16331 2.INSTALL WATER OUTLET

a.

Install the water inlet with the 3 bolts.

Torque:

18.5 N*m (189 kgf*cm, 14 ft*lbf)



Hide 3.FILL WITH ENGINE COOLANT

Hide 4. START ENGINE, AND CHECK FOR COOLANT LEAKS