1.INSPECT FINS FOR BLOCKAGE
If fins are clogged, wash them with water or a steam cleaner and dry with compressed air.
If the distance between the steam cleaner and the core is too close, there is a possibility of damaging the fin, so keep the following injection distance.
| Injection Pressure | Injection Distance |
|---|---|
| 2,942 - 4,903 kpa (30 - 50 kg/cm2, 427 - 711 psi) | 300 mm (11.811 in) |
| 4,903 - 7,845 kpa (50 - 80 kg/cm2, 711 - 1,138 psi) | 500 mm (19.685 in) |
If the fins are bent, straighten them with a screwdriver or pliers.
Never apply water directly onto the electronic components.