15710
1.INSTALL OIL COOLER TO OIL COOLER COVER
Install 2 new gaskets and the oil cooler to the oil cooler cover with the 4 nuts.
16 N*m (163 kgf*cm, 12 ft*lbf)
15701B
2.INSTALL OIL COOLER AND COVER ASSEMBLY
Install a new gasket, the oil cooler and cover assembly with the 8 bolts and 3 nuts. Uniformly tighten the bolts and nuts in several passes.
21 N*m (214 kgf*cm, 15 ft*lbf)
Using a 6 mm wrench, install the washer and bolt.
21 N*m (214 kgf*cm, 15 ft*lbf)
17152
3.INSTALL STUD BOLT FOR EXHAUST MANIFOLD
47 N*m (480 kgf*cm, 35 ft*lbf)
15609
4.INSTALL OIL FILTER BRACKET
Install a new gasket and the oil filter with the 4 bolts.
44 N*m (449 kgf*cm, 32 ft*lbf)
Each bolt length is indicated in the illustration.
Bolt length:
A 75 mm (2.95 in.)
B 70 mm (2.76 in.)
5.INSTALL RELIEF VALVE
Install the relief valve and spring with a new gasket and the relief valve.
49 N*m (500 kgf*cm, 36 ft*lbf)
15601
6.INSTALL OIL FILTER
7.FILL WITH ENGINE COOLANT
8.START ENGINE AND CHECK FOR LEAKS
9.CHECK ENGINE OIL LEVEL