1.REMOVE RELAY BOX COVER
28300
2.REMOVE STARTER RELAY (Marking: ST)
28300
3.INSPECT STARTER RELAY
Inspect the relay continuity.
Using an ohmmeter, check that there is continuity between terminals 1 and 2.
If there is no continuity, replace the relay.
Check that there is no continuity between terminals 3 and 5.
If there is continuity, replace the relay.
Inspect the relay operation.
Apply battery positive voltage across terminals 1 and 2.
Using an ohmmeter, check that there is continuity between terminals 3 and 5.
If there is no continuity, replace the relay.
28300
4.REINSTALL STARTER RELAY
5.REINSTALL RELAY BOX COVER