87138
1.INSPECT HEATER BLOWER RESISTOR
Measure the resistance according to the value(s) in the table below.
| *a | Component without harness connected
(Heater Blower Resistor) |
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| 1(E) - 4(B) | Always | 3.11 to 3.59 W |
| 3(M1) - 4(B) | Always | 1.07 to 1.23 W |
| 2(M2) - 4(B) | Always | 0.31 to 0.35 W |
If the result is not as specified, replace the heater blower resistor.